Schulz L-series Msl 10 max- 10CFM 1 to 2 hp
- – 2 cylinder
- – 2″ pistons
- – 125 PSI Recomended
- – 140 PSI Max
- – Oil lubricated
- – Fly wheel diameter 10″
- – Fly wheel uses one (A) section belt
- – Air discharge port on head is 3/8″ female pipe thread which measures about 9/16″ in diameter
- -Looking at the flywheel side the air outlet / discharge port comes out on the right hand side.
- – Oil sight glass located on front of the pump for easy viewing.
- – If looking at the front of the pump where sight glass is located the bolt mounting holes are 5 7/8″ wide center to center, the bolt holes are slotted from front to back so the bolt holes from the front of the pump to the back can be anywhere 4 3/4″ center to center to 6 1/4″ center to center.
- – Total width of pump 7″
- – Total depth including fly wheel 11.25″
- – Total height a little over 12″